Artilery Sidewinder SWX1 CURA 4 Profile Download
DISCLAIMER! If you download the file, then check and make sure that the file sizes match!
I do not take any responsibility for the linked files. If you use them, practice extreme caution. Instead of downloading the PDF, open it in your browser.
- Cura 4.0 Profile.pdf
File size: 371.9 KiB (380,819 bytes)
- SWX1 Fine.curaprofile
File size zipped: 881 bytes
File size unzipped: 3.3 KiB (3,387 bytes)
After you download, right-click and compare the file size of the SWX1 Fine curaprofile. It should be exactly 3,387 bytes when unzipped. If it is not, then “somebody” added something. Please let me know if that’s the case. Delete the file if the provided file sizes don’t match.
Alternate SWX1 Cura download suggestion
If you have Facebook, then find the Artillery Sidewinder SWX1 Facebook group page and get it from there. My file is clean but once I upload it, I have no control what others do to it. This is true for anything that can be downloaded from unofficial websites. So be careful and protect yourself.
My .stl files – ready for 3D printing.
You can download my Artillery Sidewinder X1 X-Axis end cap form thingiverse.com
If you download the above file then compare the file size to the one shown in the picture. Getting something from the internet is risky so it’s always good to check. The exact file size should be 53,684 bytes.
End Cap Placement
Once printed, attach the end cap as shown in the image below.
German: Der Teil deckt die rechte Oeffung der Schiene ab an welcher der Druckkops angebracht ist.